Prince Manufacturing SP20B20A9H4-L Hydraulic Gear Pump, 35.73 HP Motor, 3000 PSI Maximum Pressure, 17.76 GPM Maximum Flow Rate, Counter Clockwise Rotation, Self-Lubricating, SAE A Flange, Aluminum

This Gear pump now utilizes self-lubricating thrust blocks that eliminate the need for separate wear plates. They are made from a high strength aluminum alloy with exceptional anti-galling properties. This new bearing features a robust fluoropolymer PTFE wear surface that yields unsurpassed load carrying capabilities and cavitation resistance even at low speeds and moderate levels of contamination. Also, since its resin layer is self-lubricating, contamination from bearing wear in high load situations (when no oil film is present) is reduced. This new thrust block design combined with these advanced bearing results in lower friction and less internal oil loss resulting in higher pump efficiencies.

• Self-Lubricating Thrust Blocks and High Strength Aluminum.
• 3/4" Straight Keyed.
• SAE "A" 2 Bolt Mount.
• Max 3000 PSI.
• SP20B Series SAE "A" Flange Pump, 01.220 Cubic Inches Per Revolution.

Link_

Finish Thompson A100007 M6 1/2 HP Air Motor (80-100 psi @15-32 cfm) for Drum Pump

1/2 HP Air Motor (80-100 psi @15-32 cfm): Lightweight, Operates from customer-supplied compressed air source, Variable speed, Muffler and control valve.

Link_

Pulsafeeder LPH6SA-KTC3 Pulsafeeder Diaphragm Metering Pump, ABS Body, PVDF Head & Fitting, Adjustable Single Head, 120 GDP, 125 Max Strokes/Min, 100 psi Max Pressure

Pumps use mechanical action to move liquids, gases, or slurries (solids suspended in a liquid or gas). The mechanical action is categorized as either positive displacement (PD) or kinetic. PD pumps capture and release discrete amounts of flow into a chamber and then force it out. Some examples of PD pumps are fuel and oil pumps in cars, pumps in hydraulic systems, and bicycle pumps. Kinetic pumps move liquids, gases, or slurries by transferring energy from the pump's movement to the flow. They use an impeller to draw the flow in, add energy to the flow, and move it through a volute (a spiral funnel through which the flow moves), and into the system.  Some examples of kinetic pumps include centrifugal (the most common pump in industrial applications), in-line pumps, sump pumps, and suction pumps. Energy sources for all types of pumps include wind power, manual operation, electricity, and gasoline or diesel fuel.

Pulsafeeder manufactures products that transfer and control fluids for applications in the water, oil, and gas industries. The company, founded in 1936, is headquartered in Rochester, NY.

• Electronic diaphragm metering pump for a variety of industrial applications.
• ABS body for chemical and corrosion resistance, performance under wide temperature ranges, and lightweight.
• PVDF head and fitting for resistance to solvents, acids, bases, and heat.
• Maximum pressure rating of 100 psi.
• Maximum viscosity of 1,000 cps.

Link_