Barclay TKCTRN60SN4 60" Cast Iron Tub Kit with Metal Cross Handles Tub Filler

Relax while you bathe in this stunning cast iron roll top tub with ball and claw feet. Accompanying tub filler features elephant spout and hand shower. All necessary accessories are provided to install your tub to ensure a perfect bathing experience.

Link_

Ames CFFULL Continuous Flow Full Bundle

Includes CTPMP - Continuous Flow Pump (includes Hose, Whip Hose, and Z-Swivel), CTVLV - Radio Frequency Taper/Continuous Flow Controller, CTBXC - Radio Frequency Box Controller, T05CF - Continuous Flow Taper, T25CF - Continuous Flow 10 in. Finishing Box, T30CF - Continuous Flow 12 in. Finishing Box, T8042 - Continuous Flow 42 in. Finishing Box Handle, T8054 - Continuous Flow 54 in. Finishing Box Handle, T14CF - Continuous Flow 42 in. Corner Finisher Handle, T14EC - Continuous Flow 60 in. Corner Finisher Handle, 48TT - 3 in. EasyRoll Adjustable Corner Finisher, 48XTT - 3.5 in. EasyRoll Adjustable Corner Finisher.

Link_

Goulds 8M1504 3 Phase 150 HP 460V 8 inch Motor

FEATURES: Insulation Wire - The coil conductor insulation material is a specially developed denatured polypropylene, which offers excellent leak-resistant characteristics. Three barriers are applied to the copper conductors to provide complete insulation against the motor's cooling fluid. This design is the result of extensive research and is of superior quality. It insures that CentriPro motors will have an extremely long service life. Sand Resistant Slinger and Lip Seals:CentriPro submersible motors feature double-row, grease packed, lip seals to prevent sand from entering the motor. A carbon steel slinger with a baked on epoxy coating pre- vents sand from entering the lip seal area. Additional protection against sand intrusion is provided by the close tolerance slinger guide with a .02" fit. This design is field-proven in West Texas wells which are considered to be some of the worst sandy well applications. Best of all, these features are standard for a CentriPro motor, so there is no need to stock one motor for clean wells and another more expensive motor for the more abrasive, sandy jobs. High Torque Characteristics:The stator laminations are constructed of high quality, electrical grade, silicon steel which provide high torque even when the motor is subjected to nominal voltage variations. Balancing:The rotor balance rings (one on each end of the rotor) allow for excellent dynamic balance for the rotating element of the motor. Carbon Sleeve Bearings - Two carbon, water-lubricated, guide bearings are used to properly align the shaft. The bearings have a large surface area to better support the shaft, reducing whipping, while acting as a steady bushing. Water-Filled Design - The internal cooling water is mixed with antifreeze and antirust liquid to allow the motor to be stored at -22º F (-30º C).

Bulb Voltage

460 Volts

• Replaceable Plug-in Motor Lead.
• Insulation.
• Heat Resistant.
• Sand Resistant Slinger and Lip Seals.
• High Torque Characteristics.

Link_

Arch Strapping Machine, Automatic

Arch Strapping Machine, Automatic, Strapping Size 5/6mm, Length 42 In., Width 25-5/8 In., Table Surface Height 32-1/4 In. to 36-1/4 In.Max. Package Size 25 In.W x 19 In. H, Core Dia. 8 In., Tension Capacity 3 lb. to 100 lb., Voltage 110VAC, Amps 5, Frequency 60 Hz, For Use With Plastic Strapping.

• Automatic, High Speed, Arch.

SAMPLE OF CUSTOMER REVIEW –

1) Performs well - Strapper performs well. This strapper does not require the use of compressed air which is a plus in many situations. We have had two of these now for two years in the commercial printing business and they have held up well. Just make sure when ordering the strapping material, you order the correct core size. The strapping that we had on previous machines appeared to be correct but in fact were too large....causing the spool to waddle around and give us troubles. If taken care of this strapper should serve you well. The cost is a bit much....could be lower.

By Comm Prntg Co. on February 23, 2015

Link_

Pump Motor, 3-Ph, 100 HP, 1775, 460V, 405TCZ

Technical Specification Item Close-Coupled Pump Motor Motor Application Pumps Motor Sub Application Waste Water Motor Type 3-Phase Enclosure Totally Enclosed Fan-Cooled HP 100 Nameplate RPM 1775 Frame 405TCZ Rotation CW/CCW Voltage 460 Full Load Amps 111 Phase 3 Hz 60 Mounting Face/Base Bearings Regreasable Ball Frame Material Cast Iron Thermal Protection None Service Factor 1.25 Max. Ambient Temp. 40 Degrees C Shaft Dia. 1-1/4 Shaft Length 5 Shaft Type JM Threaded Length Less Shaft 33 Overall Length 38 Insulation Class F RPM Range 1701-1800 Duty Continuous Nominal Efficiency 95.4% Efficiency Group NEMA Premium Inverter Rated 1000:1 Variable, 20:1 Constant Torque Standards UL Recognized, CSA Certified, CE Compliant Compliance and Restrictions Compliance and Restrictions None This listing is for each. _DELETE_.

Link_