BSM Pump 213-3-104-1 Gland

BSM Pump manufactures industrial rotary gear, vane, and centrifugal pumps. The company, founded in 1992, is headquartered in North Kingstown, RI.

• Gland plate replacement part for sealing a rotating shaft.
• For use with a rotary gear pump.
• Iron for compressive strength and resistance to wear.

Link_

BSM Pump 466-3163-4 #3 Rotary Gear Pump Repair Compression Packing 4 Per Set For Models 3, 3S, 4S, 5S, 13, 23, 24, 3SST, 4SST And 5SST

Rotary gear pump repair parts.

• Type compression packing.

Link_

Fill-Rite SD62 Hand Pump Rotary 2-Vane Curved Spout

Tuthill rotary vane hand pump is an easy to use hand-operated rotary vane pump that delivers approximately six gallons per 100 revolutions dependably and quickly. Features a gooseneck discharge spout for less chance of spilling.

• Hand operated for easy use.
• Delivers approximately 6 gallons per 100 revolutions quickly.
• Made of lightweight die-cast aluminum for durability.
• 1" polymer suction pipe adjusts for 15 to 55 gallon drums.
• Use with medium-viscosity oils, diesel fuel and non-corrosive fluids.

Link_

Fill-Rite FR112C Rotary Hand Pump Complete with Counter

Cast aluminum Fill-Rite pump provides smooth, continuous transfer of medium viscosity liquids, as well as oil, gasoline and diesel fuel. Improved seal keeps water out. Built-in check valve and strainer. Pump easily mounts to a standard drum with in. Features include: 3/4 inch x 8 foot NPT hose, nozzle spout, counter, anti-siphoning device, hose with static wire, and a 22 inch to 40 inch telescoping suction pipe. Padlockable pump can be set up for reverse flow and is adaptable for drums, kegs or storage tanks. Made in the U.S.A.

• 10 gallons per 100 revolutions.
• UL (Underwriters Laboratories) approved.
• Can be used to pump in reverse direction.
• Counter is included.
• Cast iron aluminum body.

Link_

BSM Pump 713-10-3 1S Rotary Gear Pump Foot Mounting Without Relief Valve

Pumps use mechanical action to move liquids, gases, or slurries (solids suspended in a liquid or gas). The mechanical action is categorized as either positive displacement (PD) or kinetic. PD pumps capture and release discrete amounts of flow into a chamber and then force it out. Some examples of PD pumps are fuel and oil pumps in cars, pumps in hydraulic systems, and bicycle pumps. Kinetic pumps move liquids, gases, or slurries by transferring energy from the pump's movement to the flow. They use an impeller to draw the flow in, add energy to the flow, and move it through a volute (a spiral funnel through which the flow moves), and into the system.  Some examples of kinetic pumps include centrifugal (the most common pump in industrial applications), in-line pumps, sump pumps, and suction pumps. Energy sources for all types of pumps include wind power, manual operation, electricity, and gasoline or diesel fuel.

BSM Pump manufactures industrial rotary gear, vane, and centrifugal pumps. The company, founded in 1992, is headquartered in North Kingstown, RI.

• S Series rotary gear pump for standard motor speeds suitable for pumping oils and other liquids.
• Foot-mounted without relief valve.
• Cast iron casing with heat treated gears and case hardened shafts.

Link_

Fill-RiteFR319VBPC 115V Hi-Flow AC Pump with Meter/Pulser/Safe Barrier, 33 GPM

Fill-Rite FR319VBPC 115/230 Volt High Flow AC Diesel transfer pump with 900DP meter with pulser and safe barrier delivers up to 33 GPM (125 LPM). This 115V transfer pump is designed especially for use with fuel management systems.

• 115/230 Volt AC 3/4 HP utility rotary vane pump.
• 1 1/4 inch inlet/1 inch outlet.
• Cast iron pump housing with bronze rotor and carbon vanes.
• Automatic bypass valve.
• Duty cycle: 30 minutes on/30 minutes off.

Link_

Vickers V Series Double Vane Pump, 2500 psi Maximum Pressure, 11.8 cubic-inch/rev Displacement, Right Hand Shaft Rotation, 4" CD 61 Flange Inlet, 1-1/2" CD 61 Flange and 1-1/4" CD 61 Flange Outlet, 45 Degrees CW from Inlet

Pumps use mechanical action to move liquids, gases, or slurries (solids suspended in a liquid or gas). The mechanical action is categorized as either positive displacement (PD) or kinetic. PD pumps capture and release discrete amounts of flow into a chamber and then force it out. Some examples of PD pumps are fuel and oil pumps in cars, pumps in hydraulic systems, and bicycle pumps. Kinetic pumps move liquids, gases, or slurries by transferring energy from the pump's movement to the flow. They use an impeller to draw the flow in, add energy to the flow, and move it through a volute (a spiral funnel through which the flow moves), and into the system.  Some examples of kinetic pumps include centrifugal (the most common pump in industrial applications), in-line pumps, sump pumps, and suction pumps. Energy sources for all types of pumps include wind power, manual operation, electricity, and gasoline or diesel fuel.

Vickers is a brand of Eaton, which manufactures electrical, hydraulic, and mechanical power equipment. The company, founded in 1911, and is headquartered in Dublin, Ireland.

• Fixed-displacement hydraulic pump for a variety of mobile and industrial applications.
• Independent intra-vane cartridge design allows servicing without removing pump from its mounting.
• Low-noise design for indoor applications.
• Right-hand rotation of drive shaft.
• Maximum pressure rating of 2,500 psi.

Link_